Nissan Forklift Training Video

Forklifts 🚒 are Widely 👐 used 🎶 to improve 💕 the efficiency 📈🕐 of logistical distribution 📤 systems 🗺,

However 🖐💯, this convenient 🏪 transporting 🚛 machine 📠 may 🗓 be the cause 💋 of serious 😒 accidents 💩 or casualties 👑 if used 🎶 incorrectly 🚫.

In order 📑 to prevent 🚫 accidents 🙈 and/or 🤖 casualties 👑, Basic 😶😧 operation 🔪⚔ of the Counterbalance forklift 🚒 is explained 👨🏼‍🏫👦🏼 in this video 📹.

Pt 😳👅. 1 ❗: Getting 🉐 On/Off and Starting 🔘

Before 😂 starting 🆕 any operation 👌 with a forklift 🚒, ensure 👌 the forks 🍴 are in the proper 👌 safe 😓 position 💯 in accordance 🔛 with the type ⌨ of load 💦👅 or pallet to be handled 😛.

The Recommended 🙇 width 🤭🍑 between 👉👈 the forks 🍴 is 1/2th ⏳ to 3/4th's of the width 🤭🍑 of the pallet

When ⏰ adjusting the position 😻 of the forks 🍴, place 🏆 them symmetrically to the center ⭕ of the forklift 🚒, Take 💅 extra 😄 care 😘 to protect 🔒 Hands 🙊✋🏿 and fingers 👆 from getting 🉐 caught 🎣 in the forks 🍴

Before 😂 getting 🉐🅰 on 🔛, inspect 🕵🔎🔍 the front 🔝 and rear 🍑 surroundings 📫 by Indication ☝ and vocalization 🗣.

Mount 🗻 the seat 😂💺 from the left 👈 side 👳, holding 👫 on 🔛 to the assist 🙋🏻 grip 👊 with your 👉🚟 left 💇🏿🍒👈 hand ✋🏼, and the seat 💺 back ⬅ with your 👉🅱 right 👌 hand ✋🏻🤚🏻, place 🏆🏢 your 👈 left 👈 foot 👣😳 on 🔛 the step 🚶🏼‍♂️ to get 🉐 on 🔛 the forklift 🚒.

Adjust 🛠🔧 the rear-view ↩ mirrors 🔮 and fasten ⛩ the seat 💺 belt 👖. Use 🏻 the Left 👈 side 👈👉 of the forklift 🚒 to get 🉐🅰 on 🔛 and off 📴.

Getting 🔟 on 👅💦 or off 📴 the forklift 🚒 or adjustment 📉 of the seat 💺💀😲 is only permitted 🖊 when 🍑 the forklift 🚒 is stationary. never ❌ grab 🏼 the steering ☸ wheel 🚗 or any operational levers 😡🤗😟.

Jumping 🦗🦟 on 🔛 and off 📴 is strictly ⛔😠 prohibited 👮.

Hold 🛂 the steering ☸ knob 🍆 with your 👉 left 👈 hand ✋👌🤛, confirm 💦 that the select 🐟🐠 lever 😡🤗😟 is placed 🐢🏊💨 in neutral 🌐 position 💯. Confirm ✔ that the parking 🏞 break 💔 is set 📐.

Then insert 👀 the key 🔑 into the key 🔑 switch 🔥 and start 🆕 the engine 👷. Lift 🚚 the forks 🍴 5-10 cm 💦. from the ground 🌱, then tilt ↗ the mast fully 🌝 backward ◀.

Depress 🙌😭😏 the brake ✋⛔❗ pedal. Before 😂 starting 🆕 the Forklift 🚒, always 🕔 inspect 🕵🔎🔍 the vicinity ⚠ of the forklift 🚒 by indication ☝ and vocalization 🔊. When 🍑 safety 🔒 has been confirmed 💀, Depress 😞 the break 💥👉 pedal and shift 🦂 the select 🐟🐠 lever 🅱 into forward ⏩.

Release 💦 the parking 🅿 break 💔 and depress 😭 the accelerator pedal to move 📦 forward ⏩.

Pt 😳👅. 2 ✌: Right-Angle Turns 🔄 (Forward/Reverse)

Now to right 👌🌃 angle ⬅↩↗ turns 💃.

Drive 🚗 forward 📲 to the center 🏢✈ of the isle 🇮🇲 and approach 😜 the corner 🌽 gradually 🏫🎒.

When ⏰ the backrest of the forklift 🚒 reacher the corner 🌽, start 🆕 turning 💃 the steering ☸ wheel 🚗.

When ⏰💦 the middle ⚫ section 😼👌💥 of the forklift 🚒 arrives 🎅 at the center ⭕ of the isle 🇮🇲 your 👉 entering 🚪, return ↩ the steering ☸ wheel 🚗 quickly 🏃🏻💨 to the straight 💩📏 position 📍

In addition ➕, be aware 🙌 of the turning 💃 radius 🙈 difference 😡 of the outer 🌌 wheels 🎡, as it is different 😡 from automobiles 🚗🏎😍.

Next 👉, right 👌 angle ⬅↩↗ turns 💃 in reverse ⏪.

Drive 🚗 the forklift 🚒 backward ◀ down 🔻 the center ⭕ of the isle 🇮🇲, When ⏰ the front 🔝 wheels ☸ are about 💦 one 👆☝ meter 📏 from the corner 🌽, confirm 💦 the corner 👉🏽👌🏿👍🏿 to turn 🔄.

Turn 🔄 the steering ☸ wheel 🚗 quickly 🏃 when 👆🕙⏰ the front 🔝 wheels 🎡 pass 💯🤽‍♀️ the corner 🌽.

While checking ✅ the center 🏢✈ of the counterweight 📿😛 and the center 🏢✈ of the isle 🇮🇲 behind ↩ the forklift 🚒, return ↪ the steering ☸ wheel 🎡 quickly 🏃⏩❗ to the straight 💑 position 📍

When ⏰ making 💘 right ✔ angle 📐✏🔢 turns 🔄♂♀, you 💯👈 must 👫 observe 👀 the following 🚸:

If the load 💦 blocks 🚫❌ your 👉 vision 👓👀🕶, drive 🚗 backward ◀.

If Necessary 😏, ask 🙏 someone 👤 to assist 💁 you 👉🏻.

Adhere 🎞 to the turning 💃 ability 💪 of the forklift 🚒. Drive 🚗 slowly ⬅🐢.

Always 🔥 be aware 👀 of any obstacles 1️⃣, personnel 👥, and surroundings 💫.

When ⏰🍑 ascending, drive 🚗🚐 with the load 💦 positioned uphill 🆙🤷🏽‍♀️.

When 🍑 the height ✈ of the load 💦 is higher 🅾🤤👆 than the backrest, Secure 🚔 it to prevent 🚫 collapsing.

Pt 😳👅. 3 ⭕ℹ🕘: Loading 🍆💦

Now to loading 💦🍼, Approach 😜😏💯 and square ◻ up ☝ to the pallet.

Depress 😰😭 the brake ✋❗ pedal to stop ✋ the forklift 🚒 20-30 😫🗓 cm 🥺 before 😂 the pallet.

Apply 💆‍♀️ the parking 🏞 break ☠💥, and shift 🌊 the select 💰 lever 😡🤗😟 into neutral 🌐.

Position 😻 the mast at the vertical ↕ position 💯👌👀

Lift 🚚 the forks 🍴 to the height 📏❤ of the pallet openings 🌊

Inspect 🕵👀 the right ✔, left 👈, and moving 🚚 direction 👆 by indication ☝ and vocalization 🔊.

Depress 😞 the brake ✋❗ pedal, and shift 🦂 the select 💰 lever 🎚🐒 into forward 📲⏩.

Release 🤤 the parking 🏞 break 💔🇮🇹.

Please 😂 be aware 👀 of the following 🚸 to prevent 🚫 any rollover accidents 🙈 when 🍑 loading 💦💋👅.

Only handle 🍑 loads 💦😇 which are within 👌5⃣ the forklift 🚒 loading 📂😱 capacity 🤓😏👌 indicated on 🔛 the load ⬇🔥💦 plate 👿😠.

Ensure 👌 the load 💦 is stable 🐎, avoid 🙅 unbalanced loads 📂.

Do not allow ✅ anyone 🙋🙏 onto 🐦 the pallet. Do not allow 🎫✅ anyone 🙋 underneath 🌲 the lifted 🍭 pallet.

Move 📦 forward 📲 slowly 🐌 and insert 👀 the forks 🍴 completely 🚫 into the pallet.

Depress 😞 the brake ✋❗ pedal to stop 😤✋.

Apply 💆‍♀️ the parking 🅿 break 💔 and shift 🦂 the select 👍 lever 😡🤗😟 into neutral 🌐.

Lift 🚚 the pallet to about 💦 10 🔟 cm 🥺 above 🆙 the pallet stand 🕴.

Inspect 🕵🔎🔍 the right ✔, left 👈, front 🔝✋, and rear 🍑👅 surroundings 💫 by indication 💣 and vocalization 😃🔊📢.

Shift 😂 the select 💰 lever 🅱 into reverse ⏪,

Release 😎💦 the parking 🏞 break 💔🤕,

Move 📦 backward ◀ until the distance 🗾 between 👉👈 the pallet stand 🕴 and the front 💦😜🔻 end 🔚 of the pallet is about 🤔💭 20-30 😫🗓 cm 🥺, then stop 🚫.

Apply 📄 the parking 🌳🌲 break 💔❌ and shift 🦄🐖🐄 the select 🐟🐠 lever 🅱 into neutral 😐

Lower ⬇ the forks 🍴 slowly 🐢 until the forks 🍴 are about 🤔💭 5-10 cm 🥺 above ⤴🔝 the ground 🌱.

Tilt ⏪ the mast fully 🚫🈵 backward ◀.

Inspect 🕵👀 the right 👌, left 👈 and moving 📦 direction 🔄🔙🔝 of the forklift 🚒 by indication ☝ and vocalization 🗣.

steam limit